About Us    Contact Us    Homepage    Insurance     Servicing     Site Map    Useful Information    Write Ups
      Stock
New Boats
Used Rigs
Used Motors
    New Boats
Seafarer
Stabicraft
Polycraft
Horizon
      New Motors
Honda
Evinrude
MinnKota
    Trailers
Dunbier
Honda Marine
Honda BF25
The introduction of the new BF25 further enhances Honda's range of mid size 4-stroke outboards and brings the latest engine technology within easy reach of small boat owners.

Ease of use and kindness to the human component - the person steering the boat! - are the major considerations with this exciting new range.

Firstly the tiller handle has been extended to allow for much lighter steering. In addition the indicator lamp, throttle control, power trim & tilt switch and gear shift lever are all now located on the tiller handle which allows for easier operation due to the ergonomic positioning of the controls. Power trim & tilt, gas assist tilt and increased engine capacity have also been introduced for the new BF25.

Other upgrades include engine performance with the fitment of digital CDI, providing better throttle response and more powerful acceleration and the auto starting enrichment system, which provides operators with easy starting and increased stability while running at idle speed.
25hp Honda
Features & Benefits
Four Stroke Engine Design World-renowned Honda quality combines proven reliability and superior fuel efficiency, with no oil/fuel mixing.
Lightweight Compact Design: The BF25's three-cylinder design is compact and delivers smooth operation.
Available in 2 Shaft Lengths: Standard short and long shaft lengths allow for a wider range of boat applications.
Multi-Functional Tiller Handle: The introduction of the multi-functional tiller handle on the new BF25 further enhances user comfortable comfort levels.
The upgrades include: Extended and centurally mounted tiller handle for much lighter steering and the addition of the indicator lamp, throttle control, power trim & tilt switch and gear shift lever all located in ergonomic positioning on the tiller handle.
Power Trim & Tilt: Available on the LHTD model. This feature allows the user to trim the unit for maximum performance and handling.
Gas Assist Tilt: Available on the SHGD and LHGD models. This feature allows the user to tilt the engine with greater ease.
Engine Alert System: The integrated warning system protects the engine from severe damage due to low oil, over-revving and over heat situations.
Fresh Water Flush Port: Allows easy fresh water flushing of the engine to clear debris and salt water extending the life of the outboard.
High Output Charging: 10 amps on electric start models provide enough power to keep all your electronics performing while trolling.
Emergency Stop Switch/Safety Lanyard: This standard safety feature allows the operator to clip the lanyard to the wrist and stop the engine if the operator leaves the helm.
Shallow Water Drive: Greatly reduces the risk of engine damage while navigating in shallow waters.
Environmental Performance: Ultra low emission
The BF20 achieves outstanding clean exhaust performance that exceeds both the U.S EPA (Environmental Protection Agency) 2006 and CARB (California Air Resources Board) emissions regulations for 2008 -the most stringent emissions standards in the world.
Sacrificial Anodes: One internal and two external sacrificial anodes protect metal components from corrosion.
Corrosion Protection:
Corrosion
Honda uses a unique multi-layer finish to ensure the highest possible level of corrosion resistance on all models.
Configurations
BF25D4 LHD - Long Shaft, Manual Start, Tiller Handle.
BF25D4 SHGD - Short Shaft, Electric Start, Gas Assist Tilt, Tiller Handle.
BF25D4 LHGD - Long Shaft, Electric Start, Gas Assist Tilt, Tiller Handle.
BF25D4 LHTD - Long Shaft, Electric Start, Power Tilt & Trim, Tiller Handle.

Warranty
The Honda BF25 Outboard is covered by a two year domestic and one year commercial warranty.
Ultra low emission

Specifications
Engine
Type: 4-stroke OHC 3-cylinder
Displacement: 552cc
Bore and Stroke: 61 x 63mm
Full throttle RPM range: 5000-6000 RPM
Rated power: 25HP @ 5,500 RPM
Cooling System: Water Cooled
Induction: 3 Carburettors
Ignition System: Digital CDI
Starting System: Recoil/Electric
Exhaust: Through propeller
Drive
Gear Ratio: 0.48
Gear Shift: F-N-R
Equipment
Alternator (S/L Type): 4A (Manual) / 10A (Electric)
Propeller: 3-Blade Aluminium
Diameter x Pitch (S-Type): 9-1/4 x 12inches
Diameter x Pitch (L-Type): 9-1/4 x 12inches
Emergency Stop Switch: Standard
Oil Pressure Alert: Standard
Temperature Alert: Standard
Rev-Limiter: Standard
Dimensions
Overall Length w/tiller handle: 725mm
Overall width w/tiller handle: 380mm
Overall Height (S-Type): 1,195mm
(L-Type): 1,320mm
Transom Height(S-Type): 431mm
(L-Type): 552mm
Dry Weight(L-Type): 72.5kg
Site maintained by Leisure Marine: Friday, 29 August 2008
Email any enquiries about this site to updates@leisure-marine.com.au
3242 Old Cleveland Road, Capalaba 4157, QLD.
Phone: 07 3245 5111 Fax: 07 3245 1263