About Us    Contact Us    Homepage    Insurance     Servicing     Site Map    Useful Information    Write Ups
      Stock
New Boats
Used Rigs
Used Motors
    New Boats
Seafarer
Stabicraft
Polycraft
Horizon
      New Motors
Honda
Evinrude
MinnKota
    Trailers
Dunbier
Honda Marine
Honda BF75
The Honda 75hp is a powerful 1590cc OHC 12-valve engine with unsurpassed levels of reliability, durability and fuel efficiency. Open the throttle and the response is immediate, the acceleration smooth and sure. And it seems to have power in reserve at all revs.

The power comes from an overhead camshaft, 4 cylinder,12-valve engine encased in a uniquely designed engine block with the flywheel at the base of the power head. This lowers the centre of gravity to give greater stability, manoeuvrability and smoother handling. It also helps to reduce vibration.

This engine is exceptionally quiet at all speeds but at low revs, it is barely audible and almost vibration free. For complete safety, the engine can only be started in neutral gear position and all moving parts are fully enclosed under the engine hood. 		75hp Honda
Features & Benefits
Four Stroke Engine Design World-renowned Honda quality combines proven reliability and superior fuel efficiency, with no oil/fuel mixing.
Available in 2 Shaft Lengths: Standard long and extra long shaft lengths allow for a wider range of boat applications.
Engine Alert System: The integrated warning system protects the engine from severe damage due to low oil, over-revving and over heat situations.
Fresh Water Flush Port: Allows easy fresh water flushing of the engine to clear debris and salt water, extending the life of the outboard.
High Output Charging: Standard 16 amps provide enough power to keep all your electronics performing while trolling.
Built-in Pilot Tube: Built in pilot tube in the gear case eliminates the need to drill holes in your boat for installation.
Bottom Mounted Flywheel: The flywheel is mounted on the lower end of the crankshaft, which greatly reduced the centre of gravity and stress on major internal engine components.
Forced Air Ventilation: Unique forced air ventilation system maintains a constant temperature of electrical components.
Non-Linear Mounting System: Patented non-linear mounting provides smoother operation at all engine speeds.
Standard Gauges: Tachometer and trim gauges are included with power trim models.
Shallow Water Drive: Greatly reduces the risk of engine damage while navigating in shallow waters.
Sacrificial Anodes: One internal and two external sacrificial anodes protect metal components from corrosion.
Corrosion Protection:
Corrosion 		Honda uses a unique multi-layer finish to ensure the highest possible level of corrosion resistance on all models.
Configurations
BF75A2 LRTD - Long Shaft, Remote Control, Power Trim & Tilt
BF75A2 XRTD - Extra Long Shaft, Remote Control, Power Trim & Tilt

Warranty
The Honda BF75 Outboard is covered by a two year domestic and one year commercial warranty.
Ultra low emission

Specifications
Engine
Type: 4-stroke SOHC 4-cylinder
Displacement: 1590cc
Bore and Stroke: 75 x 90mm
Full throttle RPM range: 5000-6000 RPM
Rated power: 75HP @ 5,500 RPM
Cooling System: Water Cooled
Induction: 4 Carburettors
Ignition System: Capacitor Discharge (CDI)
Starting System: Electric
Exhaust: Through propeller
Drive
Gear Ratio: 2.3:1
Gear Shift: F-N-R
Equipment
Alternator (L-Type): 12-Volt/16-Amp
(X-Type): 12-Volt/16-Amp
Propeller: Optional
Power Trim & Tilt: Standard
Emergency Stop Switch: Standard
Oil Pressure Alert: Standard
Temperature Alert: Standard
Rev-Limiter: Standard
Speedometer Pickup: Standard
Dimensions
Overall Length: 743mm
Overall width: 481mm
Overall Height (L-Type): 1,592mm
(X-Type) 1,719mm
Transom Height(L-Type): 537mm
(X-Type) 664mm
Dry Weight(L-Type): 169kg
(X-Type): 174kg
Site maintained by Leisure Marine: Friday, 29 August 2008
Email any enquiries about this site to updates@leisure-marine.com.au
3242 Old Cleveland Road, Capalaba 4157, QLD.
Phone: 07 3245 5111 Fax: 07 3245 1263