|
|
 |
| Hydrastar Brakes: For Trailers Over
2000kg |
Hydraulic brakes with Dunbier's
new 1200psi HYDRASTAR Trailer Brake Actuator
Step up to the next generation of hydraulic trailer brake actuators
with the Hydrastar trailer mounted actuator. Unlike mechanical override
brakes, the output from the Hydrastar actuator is adjustable from
the driver's seat with electronic in-car controller to adjust the
Hydrastar's output.
Newly Updated 1200 PSI Hydrastar Actuator Offers
- Faster response for reduced stopping distance
- Simplified wiring - only 4 wires
- Draws power only when brakes are applied - no need for accessory
switch
|
 |
Hydrastar Advantages
- Sealed unit
- Does not exceed tow vehicle manufacturers' wiring amp rating
- Unit mounted bleeder fitting simplifies brake bleeding
- Works from brake controller in-car. Inexpensive to fit
Vastly Superior to Override Brakes
- Eliminates the feel of being pushed by trailer, problems with
backing a trailer uphill and brake drag
- Easily replaces override brakes on trailer
Superior to Override Brakes and Easy to Install
- Easily replaces override, air/hydraulic and vacuum/hydraulic
systems. To install, simply mount the Hydrastar to the trailer
and attach the hydraulic line
- Only 4 wires to connect, 3 wires go to the tow vehicle receptacle,
the fourth goes to the breakaway switch
- Unit mounted bleeder makes bleeding the brake lines easier
- Includes detailed instruction manual
Click
here to download the wiring diagram (pdf document)
Note that the tow vehicle must be equipped with
an industry standard electronic brake controller.
Easy to Operate
- Engages trailer brakes when tow vehicle brake pedal is applied
or when the in-car controller override is activated
|
|